Canon 2763B003 Instruction Manual - Page 39
Partial, Metering
UPC - 013803099300
View all Canon 2763B003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Partial Metering In some situations there is a sharp contrast between the main subject and the background, such as a shot of a spot-lit stage. Depending on the composition, there is a danger of the shot being over- or underexposed. To ensure good results in this type of situation, switch to the partial metering setting. 1. Set the command dial to the creative zone. The image was removed due to copyright restrictions 2. Place the partial metering area mark over the subject requiring light compensation. Press the shutter button halfway and then remove your finger from the shutter button. • The partial metering function will not operate if you keep the shutter button held down halfway. 3. Press the partial metering button. • The symbol * appears in the viewfinder, indicating that the partial metering function is on. 4. Press the shutter button halfway to focus. I • Once the shutter button is pressed halfway, the shutter speed and aper- ture value can not be changed. • The camera will focus on the area in the center AF frame. The image was removed due to copyright restrictions 5. Compose your picture and take the photograph. A Operate the partial metering button and the shutter button within six seconds from the time the exposure is displayed in the view finder. After six seconds, you will have to repeat the operation from step two. 39