Canon 4454B001 Instruction Manual - Page 111

Using the Focal Length Guide Recording 3 The focal length guide aids you when using two camcorders for 3D recording. The guide appears as a numerical value and has a range of 195 steps. You can set the guide to 0 at any point in the zoom range to help precisely calibrate both camcorders. Using the Focal Length Guide Operating modes: 1 Set up two camcorders and align their picture angle at full telephoto. 2 Open the [Focal Length Guide] submenu. [l Camera Setup] [Zoom] [Focal Length Guide] 3 Select [Set To 0] and then press SET. • The focal length guide appears on the left side of the screen as [z ±0]. To turn off the indicator, select [Off] instead. 4 Press MENU. 5 Operate the zoom. • If both camcorders are set so that the same value is displayed during zoom, the focal length for both camcorders will remain almost the same. [l Camera Setup] [Zoom] [Focal Length Guide] [Off] NOTES • Although the focal length guide is an aid for 3D recording, make sure to check the picture angle visually while recording. • You can obtain more accurate results when you perform this procedure at full telephoto. • The same picture angle for both camcorders cannot be guaranteed. 111