Canon 4454B001 Instruction Manual - Page 37

Preparing the Camcorder Preparations 2 Removing and Attaching the Terminal Covers Remove the covers for the following terminals in order to access them. • HD/SD SDI terminal* • GENLOCK and TIME CODE terminals* • VIDEO 2 terminal • W (headphone) and REMOTE terminals • HD/SD COMPONENT OUT terminal • AV terminal • USB and HDMI OUT terminals * b only. Removing the Terminal Covers 1 Open the terminal cover and pull it out. 2 Grasp the strip connecting the terminal cover to the camcorder and pull. This step is not necessary for the covers for the HD/SD SDI, GENLOCK, TIME CODE and VIDEO 2 terminals. Attaching the Terminal Covers Insert the connecting strip into the opening to attach the terminal cover. NOTES • If the connecting strip is difficult to grasp, use a pair of tweezers or similar tool. Using the Wireless Controller Inserting the Battery Insert the supplied CR2025 lithium button battery into the wireless controller before use. 1 Press the tab in the direction of the arrow (ቢ) and pull out the battery holder (ባ). 2 Place the lithium button battery with the + side facing up (ቤ). 3 Insert the battery holder (ብ). Activating the Wireless Controller Operating modes: 1 Open the [Wireless Controller] submenu. [J Other Functions] [Wireless Controller] 2 Select [On] and then press SET. ቤ ባ ብ ቢ [J Other Functions] [Wireless Controller] [On] 37