Canon CINE-SERVO 50-1000mm T5.0-8.9 PL User Manual - Page 54
Canceling the movement to the framing memory position or switching to other zoom operation
View all Canon CINE-SERVO 50-1000mm T5.0-8.9 PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
5 OPERATION 1.ɹSetting the framing memory position Zoom Rocker Seesaw "Fr1P" Switch Zoom (and focus) to the position that you want to store, while holding this zoom (and focus) position, and then press the "Fr1P" switch while holding down the MEMO switch. MEMO Switch "Shtl" Switch This framing memory position is different from the shuttle memory position.The stored zoom position is retained even after the power is turned off. 2.ɹMoving to the framing memory position Once the "Fr1P" switch is pressed, the zoom starts to move toward the framing memory position at the preset speed and stops at the framing memory position. 3.ɹCanceling the movement to the framing memory position or switching to other zoom operation Movement to the framing memory position can be canceled by any of the following operations. [Zoom Framing Preset] • Press the "Fr1P" switch again. • Perform zoom operation with the zoom rocker seesaw. • Perform zoom operation with the "Shtl" switch. [Zoom, Focus Framing Preset] • Operate a connected focus demand. Movement to the memory position stops, and movement to the operating position of the focus demand takes place. E14