Canon CINE-SERVO 50-1000mm T5.0-8.9 PL User Manual - Page 59
How To Attach And Detach The Drive Unit
View all Canon CINE-SERVO 50-1000mm T5.0-8.9 PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT 6 HOW TO ATTACH AND DETACH THE DRIVE UNIT This product is structured so that the drive unit can be separated from the lens body. If it is used as a manual lens, detach the drive unit while referring to Section 6-1. If the drive unit is mounted again, mount it while referring to Section 6-2. 6-1. HOW TO DETACH THE DRIVE UNIT 1 Turn the camera and the lens power off. 2 Disconnect the 12-pin cable. 3 Detach the lens body from the camera. 4 Loosen the three drive unit fixing screws and detach the drive unit from the lens body. 5 Cap the contact on the lens body. Cap If power is supplied from the camera when the PL mount lens is used, remove the 12-pin cable and then cap the connector. E19
E19
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
This product is structured so that the drive unit can be separated from the lens body. If it is used as a manual
lens, detach the drive unit while referring to Section 6-1. If the drive unit is mounted again, mount it while
referring to Section 6-2.
6-1. HOW TO DETACH THE DRIVE UNIT
1
Turn the camera and the lens power off.
2
Disconnect the 12-pin cable.
3
Detach the lens body from the camera.
4
Loosen the three drive unit fixing screws and detach the
drive unit from the lens body.
5
Cap the contact on the lens body.
If power is supplied from the camera when the PL mount
lens is used, remove the 12-pin cable and then cap the
connector.
Cap