Canon CINE-SERVO 50-1000mm T5.0-8.9 PL User Manual - Page 61
How To Attach The Drive Unit
View all Canon CINE-SERVO 50-1000mm T5.0-8.9 PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT 6-2. HOW TO ATTACH THE DRIVE UNIT Cap 1 Detach the cap from the contact on the lens body, fix the cap on the projection on the main body. xxxxxxxx xxxxxxxx Serial No. Connector 2 Check that the serial numbers of the lens body and the drive unit match. * If the lens and drive unit are used when the serial numbers do not match, the error message appears on the display. * If the serial numbers do not match, malfunction may occur. 3 Check that there are no foreign matters in the three drive unit fixing screw holes in the lens body. Positioning Pin NOTE If the drive unit is fixed when there is a foreign material in a screw hole, the lens body may be damaged. 4 Before attaching the drive unit, check the positions of the positioning pin and the connector. Then align the fixing screws of the drive unit with the drive unit mounting screw holes in the lens body and attach the drive unit. NOTE Use the dedicated drive unit fixing screws that were equipped with the drive unit and do not use unspecified screws. E21