Canon CINE-SERVO 50-1000mm T5.0-8.9 PL User Manual - Page 57
Macro Operation
View all Canon CINE-SERVO 50-1000mm T5.0-8.9 PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
5 OPERATION 5-5. MACRO OPERATION In macro shooting, the object distance becomes shorter than the normal minimum object distance (M.O.D.). The minimum object distance by macro operation for this lens is 1.54 m from tip of the lens at the widest angle. Macro Button To operate the macro, press the macro button to unlock the macro ring. While holding it down, turn the macro ring at the rear of the lens clockwise as viewed from the camera side to allow macro shooting. 1 Set the lens to the widest angle by manual or servo zoom operation. 2 Bring the object into focus by turning the macro ring. Macro Ring Macro operation is also possible at any zoom position other than the widest angle, but the object distance increases. Multi-point Focus Shooting In macro shooting, when zooming to change the focal length, the focal point varies. The multi-point focus shooting technique uses this characteristic. The focal point is shifted by the zoom operation. Follow the steps bellow: 1 Zoom in to a far object, and bring it into focus by normal focus operation. 2 Zoom out to a near object and bring into focus by macro operation. 3 Zoom in to the far object again while not touching the macro button set by above step 2, and bring into focus again by normal focus operation. E17