Canon CanoScan 4400F Quick Start Guide Instructions - Page 4
Preparing the Scanner - how to use
View all Canon CanoScan 4400F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
English Preparing the Scanner Preparing the Scanner Unlocking the Scanner 1 Peel the seals off the scanner. 2 Slide the lock switch on the bottom of the scanner toward the unlock mark ( ). Unlock Mark • Do not tilt the scanner more than 90 degrees from horizontal when releasing the lock. • Handle the scanner with both hands. Be careful not to drop the scanner. • Always lock the scanner when carrying or transporting it. • When locking the scanner, do not lift up the back and tilt the front (scanner button location) downward. You may be unable to set the lock. Connecting the Scanner 1 Connect the scanner to your computer with the supplied USB cable. 2 Connect the supplied AC adapter to the scanner, and then plug in. • Only use the USB cable and the AC adapter provided with the scanner. Use of other cables or adapters may lead to a malfunction. • When the scanner is connected to the USB 1.1 port on Windows XP and "HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub" message appears, ignore the message. The scanner operates in this condition without problems. • The scanner does not have a power switch. The power is activated as soon as the AC adapter is plugged in. 3