Canon Color imageCLASS MF8080Cw imageCLASS MF8380Cdw/8080Cw Basic Operation Gu - Page 122
Options, ECM RX, Incoming Ring, Remote RX, Auto RX Switch, 2-Sided Printing (MF8380Cdw Only)
View all Canon Color imageCLASS MF8080Cw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Using the Fax Functions Options Configure the following options to receive a fax. RX Function Settings RX Print Settings Fax Settings "ECM RX" (→P.6-26) "Incoming Ring" (→P.6-26) "Remote RX" (→P.6-26) "Auto RX Switch" (→P.6-26) "2-Sided Printing (MF8380Cdw Only)" (→P.6-26) "Reduce RX Size" (→P.6-26) "RX Page Footer" (→P.6-27) "Continue Printing When Toner Is Low" (→P.6-27) ECM RX The ECM (Error Correction Mode) detects and corrects errors that occur during fax transmissions. It helps in minimizing sending errors caused by a poor connection. NOTE Check if the ECM is enabled on the receiving fax machine The ECM is effective only when it is enabled on both machines. An error occurs when the ECM is enabled The error may be caused by poor telephone line conditions. When telephone line conditions are poor It may take additional time to send your fax if a problem occurs when sending over the telephone line. How to access the option [ ] (Menu) → → → Settings (Bold: Default setting) Off Disable the ECM. On Enable the ECM. Incoming Ring Specify whether or not the external telephone or the handset rings on an incoming call when is set to or . You can set the incoming call ring time. The machine automatically starts receiving a fax after the external telephone keeps ringing for a specified length of time. The machine's speaker rings on an incoming fax only when is set to . How to access the option [ ] (Menu) → → → Settings (Bold: Default setting) Off The telephone does not ring on an incoming call. Ring Times: On 1 to 2 to 99 (times) The telephone rings on an incoming call. You can set the incoming call ring time in rings in . Remote RX Specify whether to receive faxes remotely by dialing the ID number using the push-buttons of the external telephone connected to the machine when an incoming call comes. If you use the pulse line, press [ ] (Tone) and then dial the Remote RX ID. How to access the option [ ] (Menu) → → → Settings (Bold: Default setting) Off Disable remote retrieval. Remote RX On ID: 00 to 25 to 99 Eable remote retrieval. You can specify the ID number in . Auto RX Switch Set the incoming call ring time before the machine switches to the fax mode automatically. This option can be enabled when the is set to . How to access the option [ ] (Menu) → → → Settings (Bold: Default setting) Off The machine does not switch to the fax mode automatically. On Incoming Ring Time: 1 to 15 to 99 (seconds) The machine switches to the fax mode automatically after the specified length of time. 2-Sided Printing (MF8380Cdw Only) Enable this option to print on both sides of paper. This saves excessive paper consumption. How to access the option [ ] (Menu) → → → Settings (Bold: Default setting) Off Print on only one side of paper. On Print on both sides of paper. Reduce RX Size Enable this option to scale the image to fit on the selected paper size or reduce the image by a specific percentage when you receive a fax. How to access the option [ ] (Menu) → → → Settings (Bold: Default setting) Off No image reduction. Reduction Ratio: Auto, 97%, 95%, 90%, 75% On : Reduce the image automatically to fit onto the selected paper size. , , , : Reduce the image by the predetermined ratio. Reduction Method: Vertical/Horizontal, Vertical Only : Reduce the image in vertical and horizontal directions. : Reduce the image in the vertical direction only. 6-26