Canon ELURA 100 ELURA100 Instruction Manual - Page 110
Troubleshooting - problems
UPC - 013803063738
View all Canon ELURA 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Tr Trouble? oubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Solution Camcorder will not turn on. Battery pack is exhausted. Replace or charge the battery 16 pack. Attach the battery pack correctly. The camcorder switches off Battery pack is exhausted. Replace or charge the battery 16 by itself. pack. Power save function has been activated. Turn on the 68 camcorder. Cassette compartment will Battery pack is exhausted. Replace or charge the battery 16 not open. pack. Open the cassette compartment cover fully. 19 Cassette compartment Battery pack is exhausted. Replace or charge the battery 16 stopped during loading/ pack. unloading. LCD/viewfinder switches on Battery pack is exhausted. Replace or charge the battery 16 and off. pack. Battery pack will not charge. Charge the battery pack in temperatures between 0 °C and - 40 °C (32 °F and 104 °F). Battery packs become hot with use and may not charge. Wait - until the battery pack temperature is below 40 °C (104 °F) and retry charging. The battery pack is damaged. Use a different battery pack. - Recording/Playback Problem Solution Buttons will not work. Turn on the camcorder. 28 Load a cassette. 19 Camcorder will not focus. Autofocus does not work on that subject. Focus manually. 49 Adjust the viewfinder with the dioptric adjustment lever. 21 Lens is dirty. Clean the lens. 121 Viewfinder picture is blurred. Adjust the viewfinder with the dioptric adjustment lever. 21 A vertical light bar appears on Bright light in a dark scene may cause a vertical light bar - the screen. (smear) to appear. This is not a malfunction. Abnormal characters appear This camcorder uses a microcomputer. External noise or static - on the screen. The camcorder electricity may cause abnormal characters to appear on the does not operate properly. screen. In such case, disconnect the power source and reconnect it after a short time. If the problem persists, remove all power source including the removal of the back up battery to reset all the camcorder's settings. " " flashes on the screen. Load a cassette. 19 " " flashes on the screen. Battery pack is exhausted. Replace or charge the battery 16 pack. " " flashes on the screen. Condensation is detected. See reference page. 113 "REMOVE THE CASSETTE" Unload and reload the cassette. 19 appears on the screen. 110