Canon ELURA 100 ELURA100 Instruction Manual - Page 16
Step 1: Preparing the Power Supply - not charging battery
UPC - 013803063738
View all Canon ELURA 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Step Preparation 1: Preparing the Power Supply The camcorder can be powered by a battery pack or be connected to a household power source. Charge the battery pack before use. Attaching the Battery Pack 1. Turn the switch to . 2. Open the LCD panel. 3. Attach the battery pack to the camcorder. • Remove the terminal cover of the battery pack. • Slide in the connector end of the battery in the direction of the arrow and press it gently until it clicks. To remove the battery pack: 1. Open the LCD panel. 2. Hold down the BATTERY RELEASE button and pull out the battery from the ridge on its bottom part. BATTERY RELEASE button Charging the Battery Pack 1. Connect the power cord to the adapter. 2. Plug the power cord into a power outlet. 3. Open the front terminal cover and connect the power adapter to the camcorder's DC IN terminal. The CHARGE indicator starts flashing. The indicator will stay on when the charging is completed. To remove the power adapter: 1. Disconnect the power adapter from the camcorder. 2. Unplug the power cord from the power outlet. 3. Disconnect the power cord from the adapter. CHARGE indicator DC IN terminal 16