Canon ELURA 100 ELURA100 Instruction Manual - Page 17
Plug the power cord into a power
UPC - 013803063738
View all Canon ELURA 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Using a Household Power Source Connect to a household power source to use the camcorder without worrying about the battery power. You can keep the battery pack attached; the battery power will not be consumed. E 1. Turn the switch to . 2. Connect the power cord to the power adapter. 3. Plug the power cord into a power outlet. 4. Open the front terminal cover and connect the power adapter to the camcorder's DC IN terminal. Preparation Turn off the camcorder before connecting or disconnecting the power adapter. Do not connect any products that are not expressly recommended to the camcorder's DC IN terminal or to the power adapter. You may hear some noise from the power adapter during use. This is not a malfunction. Do not disconnect and reconnect the power cord while charging a battery pack. Charging may stop. The battery pack may not be charged correctly even if the CHARGE indicator is continuously on. The battery pack may also not be charged correctly when a power outage occurs during charging. Remove the battery pack and attach it back to the camcorder. When the power adapter or battery pack is defective, the CHARGE indicator flashes rapidly (at about 2 flashes/second) and the charging stops. The CHARGE indicator informs you about the charge status. 0-50%: Flashes once every second More than 50%: Flashes twice every second 100%: Continuously on 17