Canon EOS R6 Advanced User Guide - Page 102
Focus on the subject., Check the display and shoot., Shutter speed display
View all Canon EOS R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
3. Focus on the subject. Press the shutter button halfway. The aperture value is set automatically. 4. Check the display and shoot. As long as the aperture value is not blinking, the standard exposure will be obtained. Caution If the lowest aperture value blinks, it indicates underexposure. Turn the < > dial to set a slower shutter speed until the aperture value stops blinking or set a higher ISO speed. If the highest aperture value blinks, it indicates overexposure. Turn the < > dial to set a faster shutter speed until the aperture value stops blinking, or set a lower ISO speed. Note Shutter speed display For example, "0"5" indicates 0.5 sec. and "15"", 15 sec. 102
3.
Focus on the subject.
Press the shutter button halfway.
The aperture value is set automatically.
4.
Check the display and shoot.
As long as the aperture value is not blinking, the standard exposure will
be obtained.
Caution
If the lowest aperture value blinks, it indicates underexposure.
Turn the <
> dial to set a slower shutter speed until the aperture value stops
blinking or set a higher ISO speed.
If the highest aperture value blinks, it indicates overexposure.
Turn the <
> dial to set a faster shutter speed until the aperture value stops
blinking, or set a lower ISO speed.
Note
Shutter speed display
For example, “
0"5
” indicates 0.5 sec. and “
15"
”, 15 sec.
102