Canon EOS R6 Advanced User Guide - Page 104
Focus on the subject., Check the display and shoot., Aperture value display
View all Canon EOS R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
3. Focus on the subject. Press the shutter button halfway. The shutter speed is set automatically. 4. Check the display and shoot. As long as the shutter speed is not blinking, the standard exposure will be obtained. Caution If the "30"" shutter speed blinks, it indicates underexposure. Turn the < > dial to decrease the aperture value (open the aperture) until the shutter speed blinking stops or set a higher ISO speed. If the "1/8000" shutter speed blinks, it indicates overexposure. Turn the < > dial to increase aperture value (close the aperture) until the shutter speed blinking stops or set a lower ISO speed. Note Aperture value display The higher the value, the smaller the aperture opening will be. The aperture value displayed varies depending on the lens. If no lens is attached to the camera, "F00" will be displayed for the aperture. 104