Canon EOS R6 Advanced User Guide - Page 617
Passive mode
View all Canon EOS R6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 617 highlights
3. Enter the FTP server IP address. Use the virtual keyboard ( ) to enter the IP address. If DNS is used, enter the domain name. To set the entered values and return to the screen for step 2, press the < > button. 4. Configure the port number. Normally, set [Port number setting] to 00021. Select [OK] to go to the next screen. 5. Configure the passive mode setting. Select [OK] to go to the next screen. If an Error 41 (Cannot connect to FTP server) is displayed in step 8, setting [Passive mode] to [Enable] may resolve it. 617
3.
Enter the FTP server IP address.
Use the virtual keyboard (
) to enter the IP address. If DNS is used,
enter the domain name.
To set the entered values and return to the screen for step 2, press the
<
> button.
4.
Configure the port number.
Normally, set [
Port number setting
] to 00021.
Select [
OK
] to go to the next screen.
5.
Configure the passive mode setting.
Select [
OK
] to go to the next screen.
If an Error 41 (
Cannot connect to FTP server
) is displayed in step 8,
setting [
Passive mode
] to [
Enable
] may resolve it.
617