Canon EOS R6 Advanced User Guide - Page 824

The flash always fires at full output. Flash units other than EL/EX series Speedlites used in autoflash mode always fire at full output ( ). When the flash Custom Function setting for [Flash metering mode] is set to [TTL flash metering] (autoflash), the flash will always fire at full output ( ). Flash exposure compensation cannot be set. If flash exposure compensation is already set with the Speedlite, flash exposure compensation cannot be set with the camera. When the Speedlite's flash exposure compensation is canceled (set to 0), flash exposure compensation can be set with the camera. High-speed sync is not available in < > or < > mode. Set [Slow synchro] in [ : External Speedlite control] to an option other than [1/250 sec. (fixed)] (or [1/200 sec. (fixed)] ) ( ). Remote control shooting is not possible. In still photo shooting, set the drive mode to [ ] or [ ] ( ). In movie recording, set [ : Remote control] to [Enable] ( ). Check the position of the remote control's release timing switch. If you are using Wireless Remote Control BR-E1, see Remote Control Shooting or Connecting to a Wireless Remote Control. Infrared remote controllers such as the RC-6 cannot be used for remote control shooting when the camera is paired via Bluetooth with a smartphone or wireless remote control. Set [Bluetooth settings] to [Disable]. To use a remote control for time-lapse movie recording, see Time-Lapse Movies. A white [ ] or red [ ] icon is displayed during shooting. It indicates that the camera's internal temperature is high. Image quality of still photos may be worse when a white [ ] icon is displayed. Display of a red [ ] icon indicates that shooting will soon stop automatically ( ). A red [ ] icon is displayed during movie recording. It indicates that the camera's internal temperature is high. If the red [ ] icon is displayed, it indicates that the movie recording will soon stop automatically ( ). 824