Canon EOS R6 Advanced User Guide - Page 229

Caution Focus bracketing is intended for still photo shooting on a tripod. Shooting with a wider angle of view is recommended. After depth compositing, you can crop the image if necessary. For details on lenses compatible with this feature, visit the Canon website. Set [Exposure smoothing] to [Disable] with the following lenses, because they may cause changes in image brightness. • EF100mm f/2.8L Macro IS USM • EF180mm f/3.5L Macro USM • EF-S60mm f/2.8 Macro USM Suitable [Focus increment] settings vary by subject. An unsuitable [Focus increment] setting may cause unevenness in composite images, or shooting may take more time because more shots are taken. Take some test shots to decide a suitable [Focus increment] setting. Combining the images will take longer when you have specified a higher numbers of shots. Flash photography is not possible. Shooting under flickering light may cause uneven images. In this case, lowering the shutter speed may give better results. Focus bracketing is not available when the lens's focus mode switch is set to < >. Canceling shooting in progress may cause exposure problems in the last image. Avoid using the last image when combining the images in Digital Photo Professional. Note Using a tripod, remote switch (sold separately, ), or wireless remote control (sold separately, ) is recommended. For best results, set the aperture value in a range of f/5.6-11 before shooting. Details such as shutter speed, aperture value, and ISO speed are determined by conditions for the first shot. To cancel shooting, press the shutter button completely again. [Focus bracketing] reverts to [Disable] when the power switch is set to < >. 229