Canon LV-7105 Service Manual - Page 30
SETTING-UP THE PROJECTOR, 1 Positioning the projector, 2 Installation precautions
View all Canon LV-7105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Part 1: General Information 6. SETTING-UP THE PROJECTOR 6.1 Positioning the projector This projector is designed to project on a flat projection surface. The projector can be focused from 1.6m (5.2') to 8.0m (26.3'). Refer to the figure below to adjust the screen size. 1.6m 41" 34" 2.4m 60" 50" 4.0m 100" 83" 6.0m 150" 125" 8.0m 200" WIDE END TELE END 167" H1 H2 Screen Size (W x H)mm Height(H1) Height(H2) 34" 690 x 518 478mm 40mm 60" 100" 1219 x 914 2032 x 1524 844mm 1407mm 70mm 117mm Fig. 1-12 150" 3048 x 2286 2110mm 176mm 200" 4064 x 3048 2814mm 234mm 6.2 Installation precautions 1) Temperature of air discharged from exhaust vent Hot air is discharged from the exhaust vent. Do not put the object in the way of this hot air. 2) Installation site Do not install the projector in humid or duty locations, or locations subject to a lot of oil mist or cigarette smoke. Doing so may cause dirt to adhere to the lenses, mirrors and other optical parts, resulting in impaired image quality. Also, do not install the projector in high- or low-temperature locations. 3) Operating temperature range: 5˚C to 35˚C 4) Storage temperature range: -10˚C to 60˚C 5) Condensation Do not move the projector suddenly from a low-temperature location to a hightemperature location, or suddenly raise the room temperature. Doing so can cause moisture in the air to condense on the lenses and mirrors of the projector, resulting 1-18