Canon LV S3 LV-S3_Inst.pdf - Page 13

Preparation Positioning the Projector - This projector is designed to project on a flat projection surface. - The projector can be focused from 4.3'(1.3m) to 21.3'(6.5m). - Refer to the figure below to adjust a screen size. A:B = 9:1 Note: The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image. Screen Size (W x H) mm 4 : 3 aspect ratio Zoom (min) Zoom (max) 21.3' (6.5m) 16.1' (4.9m) 10.6' (3.2m) 4.3' (1.3m) 100" 40" 83" 150" 127" 200" Max. Zoom 169" A Min. Zoom Center B 34" 34" 691 x 518 4.3' (1.3m) ----- 40" 813 x 610 4.9' (1.5m) 4.3' (1.3m) 100" 2032 x 1524 12.5' (3.8m) 10.6' (3.2m) 150" 3048 x 2286 19.0' (5.8m) 16.1' (4.9m) 200" 4064 x 3048 ----- 21.3' (6.5m) Adjustable Feet Picture tilt and projection angle can be adjusted by rotating the adjustable feet. Projection angle can be adjusted at 8.0 degrees. 1 Lift the front of the projector and pull the feet lock latches on the both sides of the projector. 2 Release the feet lock latches to lock the adjustable feet and rotate them to adjust position and tilt. 3 To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be adjusted by Menu Operation. ( P20 and P36 ) CAUTION Tilt the projector within the adjustable angle not to shorten the lamp life. Proper angle should be taken. Adjustable Feet Feet Lock Latches 13