Canon LV S3 LV-S3_Inst.pdf - Page 23

Computer Input Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA or SXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional setting. (Signal formats provided in this projector is shown on page 49 ) Note : The projector may display one of the following messages. Auto When projector cannot recognize connected signal as PC system provided in this projector, Auto PC Adjustment function operates to adjust projector and the message "Auto" is displayed on System Menu icon. ( P24.) When image is not provided properly, manual adjustment is required. ( P25 - 26 ) ----- There is no signal input from computer. Make sure the connection of computer and a projector is set correctly. ( " Troubleshooting" P44 ) Mode 1 User preset adjustment in Computer Adjustment. Adjustment data can be stored in Mode 1 - 5. ( P2526 ) PC SYSTEM MENU System Menu icon Displays system being selected. SVGA 1 Computer systems provided in the projector. The projector chooses a proper system and displays it. *Mode 1 and SVGA 1 are examples. SYSTEM Menu icon Displays system being selected. Selecting Computer System Manually PC system can be also selected manually. 1 Press MENU button to display the On-Screen Menu. Press Point 7 8 buttons to move the red frame pointer to PC SYSTEM Menu icon. 2 Press Point d button to move the red arrow pointer to the system that you want to set, and then press SET button. PC SYSTEM MENU The systems on this dialog box can be selected. Custom Mode (1-5) set in PC Adjust Menu. ( P24-26 ) 23