Canon LV S3 LV-S3_Inst.pdf - Page 25

Computer Input Manual PC Adjustment Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. In this case, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a nonsynchronized picture, a non-centered picture or a skewed picture. The Manual PC Adjustment function allows you to precisely adjust several parameters to match those special signal formats. You can store those adjusted parameters in the 5 independent memory areas, enabling you to call up whenever you need. 1 Press MENU button to display the On-Screen Menu. Press Point 7 8 buttons to move the red frame pointer to PC Adjust Menu icon. 2 Press Point d button to move the red frame pointer to the item that you want to adjust and then press SET button. Adjustment dialog box will appear. Press Point 7 8 buttons to adjust value. PC ADJUST MENU PC Adjust Menu icon Move the red frame pointer to the item and press SET button. Fine sync Adjusts an image as necessary to eliminate flicker from the display. Press Point 7 8 buttons to adjust value.(From 0 to 31.) Total dots Adjusts the number of total dots in one horizontal period. Press Point 7 8 buttons and adjust number to match your PC image. Shows status (Stored / Free) of the Selected Mode selected Mode. Horizontal Adjusts horizontal picture position. Press Point 7 8 buttons to adjust the position. Vertical Adjusts vertical picture position. Press Point 7 8 buttons to adjust the position. Current mode Press SET button to show the information of computer selected. Clamp Adjusts clamp level. When the image has a dark bar(s), try this adjustment. Press Point 7 8 buttons to adjust the value. Press SET button at this icon to adjust "Clamp," "Display area (H/V)" or set "Full screen." Current mode Press SET button at Current mode icon to show the information of computer connected. 25