Canon LV S3 LV-S3_Inst.pdf - Page 29

Computer Input Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press MENU button to display the On-Screen Menu. Press Point 7 8 buttons to move the red frame pointer to Screen Menu icon. 2 Press Point d button to move the red frame pointer to the function that you want to select. Then press SET button. SCREEN MENU Screen Menu Normal Move the red frame to the function and press SET button. Provides an image to fit screen size. True Provides image in its original size. When the original image size is larger than screen size ( 800 x 600 ), this projector enters "Digital zoom +" mode automatically. Wide Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9. Digital zoom + When Digital zoom + is selected, the On-Screen Menu disappears and the message "D. Zoom +" is displayed. Press SET button to expand image size. And press Point ed7 8 buttons to pan the image. The panning function can work only when the image is larger than screen size. A projected image can be also expanded by pressing D.ZOOM e button on the remote control unit. Digital zoom - When Digital zoom - is selected, the On-Screen Menu disappears and the message "D. Zoom -" is displayed. Press SET button to compress image size. A projected image can be also compressed by pressing D.ZOOM button on the remote control unit. To cancel Digital Zoom +/- mode, press any button except D.ZOOM ed, SET and Point buttons. Note: - This Screen Menu cannot be operated when "720p (HDTV)", "1035i (HDTV)" or "1080i (HDTV)" is selected on PC System Menu. ( P23 ). - True and Digital zoom +/- cannot be selected when "480i ", " 575i ", " 480p ", " 575p " is selected on PC System Menu ( P23 ). - This projector cannot display any resolution higher than 1280 X 1024. If your computer's screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting projector. - The image data in other than SVGA (800 x 600) is modified to fit the screen size in initial mode. - The panning function may not operate properly if the computer system prepared on PC Adjust Menu is used. 29