Canon PIXMA MG6821 User Manual - Page 483

Landscape Prints the document by rotating it 90 degrees relative to the paper feed direction. You can change the rotation direction by going to the Maintenance tab, opening the Custom Settings dialog box, and then using Rotate 90 degrees left when orientation is [Landscape] check box. To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees left when orientation is [Landscape] check box. Print Quality Selects your desired printing quality. Select one of the following to set the print quality level that is appropriate for the purpose. To set the print quality level individually, click the Main tab, and for Print Quality, select Custom. The Set... becomes enabled. Click Set... to open the Custom dialog box, and then specify the desired settings. High Gives priority to print quality over printing speed. Standard Prints with average speed and quality. Draft This setting is appropriate for test printing. Paper Source Shows the source from which paper is supplied. Cassette Paper is always supplied from the cassette. Copies Specifies the number of copies you want to print. You can specify a value from 1 to 999. Important • When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software. Always Print with Current Settings Prints documents with the current settings starting from the next print execution. When you select this function and then close the printer driver setup window, the information that you set on the Quick Setup, Main, and Page Setup tabs are saved and printing with the same settings is possible starting from the next print execution. Important • If you log on with a different user name, the settings that were set when this function was enabled are not reflected in the print settings. • If a setting was specified on the application software, it has priority. Defaults Restores all the settings you have changed to their default values. Click this button to return all settings on the Quick Setup, Main, and Page Setup tabs to their default values (factory settings). 483