Canon PIXMA MG8120 MG8120 series Getting Started - Page 12
Install the Ink Tanks
View all Canon PIXMA MG8120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
31 2 A 3 Install the Ink Tanks B C D 1. Remove the orange tape completely. 2. Remove the protective film completely. Hold the ink tank with the orange protective cap (A) pointing up while being careful not to block the Lshape air hole (B). • Handle the ink tanks carefully. Do not drop or apply excessive pressure to them. • Be sure to use the supplied ink tanks. • If the orange tape remains on the L-shape air hole, ink may splash or the machine may not print properly. • If you push the sides of the ink tank with the L-shape air hole blocked, ink may splash. Hold the ink tank by its sides and slowly twist the orange protective cap 90 degrees horizontally to remove it off. Do not push the sides of the ink tank. • Do not touch the inside (C) of the orange protective cap or the open ink port (D). The ink may stain your hands if you touch them. 10