Canon PIXMA MP950 MP950 User's Guide - Page 102
Canon PIXMA MP950 Manual
View all Canon PIXMA MP950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
(2) Remove the orange protective cap (D) from the bottom of the ink tank and discard it. Carefully hold the protective cap when removing it to prevent the ink from staining your fingers. Discard the cap once it is removed. (A) (D) (B) (C) (E) (F) (G) Important z Be sure to remove the clear film from the ink tank in the exact order shown in step 5, as failure to follow this step may cause the ink to leak and stain your clothes and hands. z Do not touch the electrical contacts (G). Doing so can cause the machine to malfunction or become unable to print. z Do not squeeze the side of ink tanks (F) as this may cause the ink to leak out and stain your clothes and hands. z Do not re-attach the protective cap (D) once you have removed it. z Do not touch the open ink port (E) once the protective cap is removed, as this may prevent the ink from being ejected properly. z Ink on the removed protective cap may stain your clothes and hands. z Ensure that all the orange tape has been peeled off along the perforation. If there remains a part of the orange tape, ink may not be ejected correctly. 5 Install the ink tank. (1) Install the ink tank into the Print Head. Note Refer to the guide label (A) and insert the ink tank in the correct position. (2) Press on the mark on the ink tank until the ink tank snaps firmly into place. (3) Ensure that the ink tank clicks into place and then its lamp lights red (B). (A) (B) 100 Routine Maintenance Chapter 11