Canon PIXMA MX492 User Manual - Page 691
If the original remains in the ADF by pressing the Stop button while the machine is scanning,
View all Canon PIXMA MX492 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 691 highlights
2801 Cause The document is jammed in the ADF. Action Remove the document following the procedure below. Important • Do not open the document cover if the document is jammed. The jammed document may be torn. • The power cannot be turned off while the machine is sending or receiving a fax, or when the received fax or the unsent fax are stored in the machine's memory. Turn the machine off after making sure that it has completed sending or receiving all the faxes. Do not unplug the power cord when turning the machine off. If you unplug the power cord, all the faxes stored in the machine's memory are deleted. • If the original remains in the ADF by pressing the Stop button while the machine is scanning the document: If you press the Stop button during scanning then the document remained in the ADF, the message about the paper remained in the ADF appears on the LCD. Press the OK button so that the remaining document is automatically fed out. • If the original is jammed in the ADF: Remove the document following the procedure below. 1. If printing is in progress, press the Stop button. 2. Turn off the machine. 3. Open the document feeder cover slowly. If a multi-page document is loaded, open the document feeder cover after removing any pages other than the jammed page from the ADF. 4. Pull out the jammed document from the ADF. 691