Canon PIXMA MX882 Network Setup Troubleshooting - Page 14
Specifying the Machine's IP Address IPv4 only, FUNCTION, WPA/WPA2, Setup, IPv4/IPv6 setting - instruction manual
View all Canon PIXMA MX882 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
ENGLISH 11-B WPA/WPA2 1 Press the OK button. Disable 2 Enter the network key, then press the left FUNCTION button. • Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive. 3 Make sure that the network key is correct, then press the left FUNCTION button. Go to . 12 When the completion screen appears, press the OK button. Specifying the Machine's IP Address (IPv4 only) Action The machine's IP Address can be specified by the following procedure. 1 Press the Setup button. 2 Select Device settings, then press the OK button. 3 Select LAN settings, then press the OK button. 4 Select Other settings, then press the OK button. 5 Select IPv4/IPv6 setting, then press the OK button. 6 Select IPv4, then press the OK button. 7 Select Yes, then press the OK button. 8 Select Manual setup, then press the OK button. • Follow the on-screen instructions to proceed with settings. 13