Canon PIXMA MX882 Network Setup Troubleshooting - Page 15

Restoring the Machine's Default LAN Settings to Perform Setup Again Action Follow the procedure below to restore LAN settings of the machine to the default state. 1 Press the Setup button. 2 Select Device settings, then press the OK button. 3 Select LAN settings, then press the OK button. 4 Select Reset LAN settings, then press the OK button. 5 Select Yes, then press the OK button. 6 Make sure that the completion screen appears, then press the OK button. The LAN setting of the machine is now restored to the default state. • Perform setup again by following the procedures in "Wireless Setup" and onward or "Wired Setup" and onward in the printed manual: Getting Started. Wireless LAN SSID Data encryption TCP/IP setting Wired LAN TCP/IP setting Inactive BJNPSETUP Inactive Obtain an IP address automatically Inactive Obtain an IP address automatically 14