Canon PIXMA iP90 iP90 Quick Start Guide - Page 82
An Error Message Appears on the Screen - power cable
View all Canon PIXMA iP90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Troubleshooting An Error Message Appears on the Screen Problem Error Writing/Output to USBnnn or MPUSBPRNnn Possible Cause Printer not ready Paper is not loaded Try This The POWER lamp will flash green when the printer is warming up or when a print job is being sent to the printer. It will glow a steady (non-flashing) green when it is ready for use or when a print job is completed. Load paper and press the RESUME/CANCEL button. Faulty connection Ensure that the printer cable is securely connected to the computer. Note If you are using a switching hub or other device, disconnect the printer and reconnect it directly to the computer and try printing again. If successful, the problem may have been with the device. There could also be a problem with the cable(s). Replace the cable(s) and try printing again. Printer Port settings Select the destination port as follows: and printer interface do not match • When connected to the computer with a USB cable Confirm that the destination Printer Port is set to MPUSBPRNnn (Canon iP90) or USBnnn (Canon iP90) (Where nn represents a number) • When performing infrared communication Open the Printer Properties dialog box directly from the Start menu. See "Opening the Printer Properties Dialog Box Directly from the Start Menu" on page 29. Ensure that the Infrared Port is selected as the destination port on the Ports tab or Details tab. · When using Windows XP or Windows 2000 The port [IR] is used as the infrared communication port. · When using Windows Me or Windows 98 The Infrared Port name is followed by the text "Infrared Printing (LPT) Port" which is enclosed in parentheses. Example: LPT3: (Infrared Printing (LPT) Port) * A port other than the LPT3 port may be selected depending on the computer setting. Follow the procedures described in the Easy Setup Instructions and reinstall the printer driver. Refer to the User's Guide for instructions on how to verify status and the correct action to take. Printer driver is not installed properly Uninstall then reinstall the printer driver. 1. Click Start, and select All Programs (or Programs), Canon iP90, and Uninstall. 2. Follow the on-screen instructions to uninstall the driver. 3. Follow the procedures described in the Easy Setup Instructions and reinstall the printer driver. The message If the Infrared Port is not selected as the print port of the printer driver, the "Cannot write to the message "Cannot write to the xxx port" (xxx is the name of the printer port) is XXX port" is displayed and printing does not start. Select the IR port (LPT3 port in Windows displayed Me/Windows 98) and retry printing. See "Printing Data through Infrared Communication" on page 15. 78