Canon PowerShot D20 User Guide - Page 119

Flash Still Images Changing the IS Mode Settings Movies Access the setting screen. Press the n button, choose [IS Settings] on the 4 tab (p. 42). Configure the setting. Choose [IS Mode], and then choose the desired option (p. 42). Optimal image stabilization for the Continuous shooting conditions is automatically applied (Intelligent IS) (p. 60). Shoot Only* Image stabilization is active only at the moment of shooting. Off Deactivates image stabilization. *The setting is changed to [Continuous] for movie recording. • If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still. In this case, set [IS Mode] to [Off]. Movies Deactivating Powered IS Powered IS reduces slow camera shake that may occur when recording telephoto movies. However, this option may not produce the expected results when used for the stronger camera shake that may occur when shooting while walking or when moving the camera to match subject movement. In this case, set Powered IS to [Off]. Follow the steps in "Changing the IS Mode Settings" (p. 119) to access the [IS Settings] screen. Choose [Powered IS], and then choose [Off] (p. 42). • [Powered IS] settings are not applied when [IS Mode] is set to [Off]. 119