Home » Canon Manuals » Video Cameras » Canon VB-S805D » Manual Viewer

Canon VB-S805D Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 44

[Date and Time] Setting Date and Time, Date], [Time], etting Method], etting of NTP, erver]

Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

[Date and Time] Setting Date and Time The following can be set here. • Current Date and Time The date and time set in the camera is shown. • Setting Select the date and time setting method, time zone and daylight saving time for the camera. server. In order to set [Use DHCP], you must change [Network] > [IPv4 Address Setting Method] to [Auto (DHCP)] (p. 40). The NTP server address acquired from the DHCP server will appear in [NTP Server (DHCP)]. Current Date and Time [Date], [Time] The date and time currently set in the camera are shown. Setting (1) [Setting Method] Select from [Set manually], [Synchronize with NTP server], [Synchronize with NTP broadcast], [Synchronize with computer time]. (2) [Date], [Time] When [Setting Method] is set to [Set manually], you can set the date and time manually. The date is entered in year/month/day format, and the time in hour:minute:second 24-hour format. (3) [Auto-Setting of NTP Server] When [Setting Method] is set to [Synchronize with NTP server], select a DHCP option for the automatic setting method of the NTP server. [Disable] Select when specifying an arbitrary NTP server. Enter the IP address or host name of the NTP server used in [NTP Server]. [Use DHCP] The camera time is synchronized with the time of the NTP server at the address acquired from the DHCP 44 [Use DHCPv6] The camera time is synchronized with the time of the NTP server at the address acquired from the DHCPv6 server. In order to set [Use DHCPv6], you must change [Network] > [IPv6] to [Enable], then set [Auto (DHCPv6)] to [Enable] (p. 41). The NTP server address acquired from the DHCPv6 server will appear in [NTP Server (DHCPv6)]. [Use DHCP/DHCPv6] The camera time is synchronized with the time of the NTP server at the address acquired from the DHCP server or DHCPv6 server. If the NTP server address can be acquired from both the DHCP server (IPv4) and DHCPv6 server, the NTP server address acquired from the DHCP server (IPv4) will be used. [Synchronize with NTP broadcast] The camera will synchronize with the NTP server time. The camera will synchronize time with NTP broadcasts received from the NTP server. [Synchronize with computer time] The camera will synchronize with the date and time of the computer currently accessing the camera. The [Time Zone] is not selected automatically, and must be set separately as required. (4) [Time Zone] Select from the list the appropriate time difference from the Greenwich Mean Time. (5) [Daylight Saving Time] Select [Enable] to automatically adjust the daylight saving time according to the time zone or [Disable] not to automatically adjust the daylight saving time.

Section	Page
Introduction	2
Disclaimer	2
Notes on Network Security	2
Copyright	2
Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio	2
Trademark Notice	3
Notes on the Included Software RM-Lite ( Disclaimer )	3
Notes on License Agreement for Included Software	3
Only for European Union and EEA (Norway, Iceland and Liechtenstein)	3
Open Source Software	4
Security Export Control	4
How to Read This Operation Guide	5
User Manuals	5
How to Use This Operation Guide	5
Icons Indicating Particular Camera Models	5
Symbols Indicating Safety Precautions	5
Safety Precautions	6
Maintenance	8
Disposing of the Camera	8
Chapter 1 Before Use	13
Features	14
Camera Software	15
Installed Software	15
Included Software	15
Additional License (Sold Separately)	15
Network Video Recording Software (Sold Separately)	15
RM-Lite (Please refer to the “Administrator Manual”)	17
Operating Environment	18
Admin Viewer/VB Viewer, Admin Tools	18
Notes on Operating Environment	19
Notes on Use When the [Windows Firewall] Function is Enabled	19
Notes on Use with Internet Explorer 9 or Greater and Windows Server 2008/Windows Server 2012	19
Notes on Use with Windows Server 2008/Windows Server 2012	20
Chapter 2 Initial Settings	23
Preparing the Camera for Use	24
Installing the Necessary Software	26
Making Initial Camera Settings	28
Launch the Camera Management Tool	28
Searching for Cameras and Setting up Networks	28
Set the Password, Date and Time, Camera Name and Video	29
Registering Camera’s IP Address to Trusted Sites	30
Access the Top Page of the Camera to Check Video	31
Access the Top Page from Camera Management Tool	31
Top Page	31
Checking Camera Video	32
Chapter 3 Setting Page	35
Setting Menu	36
Accessing the Setting Menu	38
Setting Menu	38
Items Common to All Setting Pages	38
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc	40
[Date and Time] Setting Date and Time	44
[Camera] Setting Initial Camera Settings and External Device Name	46
[Video] Setting Video Size, Quality and Frame Rate	50
[RTP] RTP Server, Audio Multicast and RTP Streaming	53
[Upload] Setting HTTP/FTP Upload and E-mail Notification	55
[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security	58
[Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer	60
[Access Control] Setting User Access Privileges	64
[IPsec] Setting IPsec	66
[SSL/TLS] Setting HTTP Communication Encryption	69
[802.1X] Network Port Authentication Settings	71
[Memory Card] Memory Card Operations and Settings	73
[Reboot Item] Setting Items Requiring Rebooting	76
[Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance	77
[Camera Angle] Digital Zoom Settings	79
Chapter 4 Admin Tools	81
Admin Tools Overview	82
Admin Tools	82
Privacy Mask Setting Tool	82
Panorama Creation Tool	82
View Restriction Setting Tool	82
Preset Setting Tool	83
Intelligent Function Setting Tool	83
Log Viewer	83
Recorded Video Utility	83
Accessing the Admin Tools	84
Launching the Admin Tools	84
Privacy Mask Setting Tool	85
Display Screen of Privacy Mask Setting Tool	85
Setting the Privacy Mask Area	86
Changing/Deleting a Privacy Mask Area	88
Panorama Creation Tool	89
Display Screens of Panorama Creation Tool	90
Capturing a Panorama Image	90
Saving/Deleting a Panorama Image on the Camera	91
Saving a Panorama Image as Image Files/Opening from Image Files	91
View Restriction Setting Tool	92
Display Screens of View Restriction Setting Tool	93
Setting View Restrictions	94
Preset Setting Tool	96
Display Screens of Preset Setting Tool	97
Setting the Preset	98
Preset Tour	101
Intelligent Function Setting Tool	103
Display Screen of Intelligent Function Setting Tool	106
Flow of Intelligent Function Setting	107
Setting Intelligent Function Detection Settings	109
Log Viewer	115
Display Screens of Log Viewer	115
Downloading Log Files	116
How to View Logs	116
Recorded Video Utility	118
Display Screens of Recorded Video Utility	118
Confirming Recorded Video	119
Narrowing Down the Number of Videos	119
Downloading Video	120
Exporting to Video Files That Can Be Played Back	120
Playing Back Videos	120
Deleting Videos	122
Displaying Memory Card Information	122
Control for Admin	123
Using Control for Admin	123
Chapter 5 Admin Viewer/VB Viewer	125
Overview of Viewer	126
Major Differences Between the Admin Viewer and the VB Viewer	126
User Authorities and Camera Control Privileges	126
Launching the Viewer	128
Launching the Viewer	128
Shutting Down the Viewer	128
Connecting from Admin Tools	128
How to Operate the Viewer	129
Display Screens of Admin Viewer	129
VB Viewer	130
Obtaining Camera Control Privileges	131
Controlling the Camera	132
Magnifying Part of the Video (Viewer PTZ)	134
Cropping and Displaying Part of Video (Digital PTZ)	136
Setting Video and Audio	137
Checking Information	140
Performing Operations and Settings in the Admin Viewer	141
Using Control for Admin	141
Displaying Event Status	146
Recording to a Memory Card Manually	147
Chapter 6 Appendix	149
Memory Card Access	150
Modifiers	152
Troubleshooting	154
List of Log Messages	156
Log Messages on the Camera	156
List of Viewer Messages	165
Messages Displayed in the Information Field	165
Restore Default Settings	167
Restoring the Initial Setting from the Maintenance Page in the Web Browser	167
Restoring Factory Default Settings with the Reset Switch on the Camera	167
List of Factory Default Settings	169
Specifications	177

Match case Limit results 1 per page

Current Date and Time

[Date], [Time]

The date and time currently set in the camera are

shown.

Setting

(1) [

etting Method]

Select from [Set manually], [Synchronize with NTP

server], [Synchronize with NTP broadcast],

[Synchronize with computer time].

(2)

[Date], [Time]

When [Setting Method] is set to [Set manually], you

can set the date and time manually. The date is

entered in year/month/day format, and the time in

hour:minute:second 24-hour format.

(3) [Auto-

etting of NTP

erver]

When [Setting Method] is set to [Synchronize with

NTP server], select a DHCP option for the automatic

setting method of the NTP server.

[Disable]

Select when specifying an arbitrary NTP server.

Enter the IP address or host name of the NTP server

used in [NTP Server].

[Use DHCP]

The camera time is synchronized with the time of the

NTP server at the address acquired from the DHCP

server. In order to set [Use DHCP], you must

change [Network] > [IPv4 Address Setting Method]

to [Auto (DHCP)] (p. 40).

The NTP server address acquired from the DHCP

server will appear in [NTP Server (DHCP)].

[Use DHCPv6]

The camera time is synchronized with the time of the

NTP server at the address acquired from the

DHCPv6 server. In order to set [Use DHCPv6], you

must change [Network] > [IPv6] to [Enable], then set

[Auto (DHCPv6)] to [Enable] (p. 41).

The NTP server address acquired from the DHCPv6

server will appear in [NTP Server (DHCPv6)].

[Use DHCP/DHCPv6]

The camera time is synchronized with the time of the

NTP server at the address acquired from the DHCP

server or DHCPv6 server. If the NTP server address

can be acquired from both the DHCP server (IPv4)

and DHCPv6 server, the NTP server address

acquired from the DHCP server (IPv4) will be used.

[

Synchronize with NTP broadcast

]

The camera will synchronize with the NTP server

time. The camera will synchronize time with NTP

broadcasts received from the NTP server.

[

Synchronize with computer time

]

The camera will synchronize with the date and time

of the computer currently accessing the camera.

The [Time Zone] is not selected automatically, and

must be set separately as required.

(4)

[Time Zone]

Select from the list the appropriate time difference

from the Greenwich Mean Time.

(5) [Daylight

aving Time]

Select [Enable] to automatically adjust the daylight

saving time according to the time zone or [Disable]

not to automatically adjust the daylight saving time.

[Date and Time] Setting Date and Time

The following can be set here.

•

Current Date and Time

The date and time set in the camera is shown.

•

etting

Select the date and time setting method, time

zone and daylight saving time for the camera.