Canon VB-S805D Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 46
[Camera] Setting Initial Camera Settings and External Device Name, Camera Name
View all Canon VB-S805D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
[Camera] Setting Initial Camera Settings and External Device Name The following can be set here. • Camera Name Enter the name of the camera. The camera name is required for use with RM-Lite. • Initial Camera Settings Sets shooting settings at camera start up. • Camera Control Set the digital zoom, AGC limit, and smart shade control strength. • Day/Night Set the day/night switching mode. • Installation Conditions Sets installation conditions, such as LED settings. • Camera Position Control Set whether or not to limit the pan, tilt and zoom operations to the preset positions. Also, set the camera position when nobody has control privileges. • External Device Name Set the external input device name and external output device name. Camera Name [Camera Name] Be sure to enter [Camera Name (alphanumeric characters)]. Up to 15 ASCII characters (spaces and printable characters) may be used for [Camera Name (alphanumeric characters)]. Note • The camera name set here will be shown when the camera is registered for use with RM Viewer. Initial Camera Settings (1) [AE Mode], [Slow Shutter], [Shutter Speed] Set the exposure control and shutter speed for the camera startup. [AE Mode] [Auto] The exposure is controlled automatically. [Auto (Flickerless)] In this mode, video flickers caused by fluorescent lights, etc., can be reduced. The shutter speed is automatically adjusted according to the brightness of the environment in which the camera is used. [Auto (Flickerless 2)] Use this mode if flickering is not reduced when [Auto (Flickerless)] is selected. However, the automatic adjustment range for the shutter speed is suppressed so as not to exceed 1/100 sec. in this mode, resulting in improper exposure (i.e., excessive brightness) in some cases. [Auto (Shutter-priority AE)] In this mode, a desired shutter speed can be specified. [Slow Shutter] Slow shutter can be used only if [Auto], [Auto (Flickerless)] or [Auto (Flickerless 2)] is selected in [AE Mode]. Set the maximum slow shutter time to be used when in auto exposure mode when capturing video in a dark place. Select [Disable], [1/15], [1/8], [1/4] or [1/2]. As slower shutter speed generates residual video when capturing a moving subject, select an appropriate time according to the capture conditions. [Shutter Speed] Shutter speed can be used only if [Auto (Shutter-priority AE)] is selected in [AE Mode]. Select a desired shutter speed from the 16 levels from [1/2] to [1/16000]. When capturing a moving subject, selecting a higher shutter speed can reduce blurry video capture. (2) [Exposure Compensation] The exposure compensation when the camera starts can be set in the range of [-4 (Dark)] to [4 (Bright)]. To brighten the video, set a positive value. To darken the video, set a negative value. The setting is not available if [Smart Shade Control] is set to [Auto]. (3) [Metering Mode] Set the metering mode when the camera starts. 46