Canon VB-S805D Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 63
Select [Switch to Day Mode] to switch to Day Mode
![]() |
View all Canon VB-S805D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
[Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer (8) [Day/Night Mode Switching] Select the Day/Night Mode switching behavior when a timer event is triggered. Select [Switch to Day Mode] to switch to Day Mode at the start time, and Night Mode at the end time. 3 Select [Switch to Night Mode] to switch to Night Mode at the start time, and Day Mode at the end time. Select [Disable] to disable Day/Night Mode switching. Setting Page Important • [Day/Night Mode Switching] can only be set in [Timer 1]. • [External Device Output] and [Day/Night Mode Switching] do not support [Repeat Interval]. • When [Day/Night] in the Admin Viewer is set to [Auto], Day/ Night Mode switching will not happen when a timer event is triggered (p. 144). • If the [Day/Night Mode Switching] settings switch Day/Night Mode while the Admin Viewer/VB Viewer is assigned camera control, control will be released. Note When using timers that run continuously for 24 hours with a [Repeat Interval] of 30 seconds or less, set the timer start and end times so the timers can run continuously. Example: Timer [Start Time] [End Time] [Repeat Interval] [Timer 1] 0:00 12:00 10 sec [Timer 2] 12:00 0:00 10 sec 63
![](/manual_guide/products/canon-vbs805d-network-camera-vbs30dvbs31dvbs800dvbs805dvbs900fvbs905f-operation-guide-5a22eef/63.png)