Canon VIXIA HF G60 Instruction Manual - Page 78
Pre-Recording, the PRE REC button.
View all Canon VIXIA HF G60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Pre-Recording Pre-Recording When pre-recording is activated, the camcorder starts recording continuously into a temporary memory (approx. 3 seconds) so when you press the REC button, the clip will contain also a few seconds of video and audio 78 recorded before you pressed the button. Operating modes: 1 Press the PRE REC button. • Pre-recording is activated and z appears at the top of the screen. • Press the button again to turn off pre-recording. 2 Press the REC button. • The clip recorded on the card will include a few seconds of video and audio recorded before the REC button was pressed. NOTES • The camcorder will not record the full 3 seconds prior to pressing the REC button if the button was pressed within 3 seconds of having turned on pre-recording or having finished the previous recording. • Pre-recording cannot be used together with slow & fast motion recording. • Pre-recording will be deactivated in the following cases: - When the power switch or mode switch is operated. - When a menu is opened. - When the shooting mode, white balance or look is changed. - When the card compartment cover is opened or the card selected for recording clips becomes full. • About the time code when pre-recording is activated: - The time code of the clip will start a few seconds before the REC button was pressed. - The time code will be recorded with the running mode set to [ Free Run]. - If the time code mode was set to [ Regen.], or to [ Preset] with [ Rec Run] running mode, the time code running mode will be changed automatically to [ Free Run] when pre-recording is activated. - When pre-recording is turned off, the time code running mode will return to its previous setting.