Canon VIXIA HF G60 Instruction Manual - Page 98
Selecting the Video Output’s Scan Mode, elect [HDMI, can Mode]., elect the de, ired option and then
View all Canon VIXIA HF G60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Connecting to an External Monitor • The time code signal will not be output from the HDMI OUT terminal in the following cases: - In mode. - When the video output signal is 720x480 / 59.94P. - When slow & fast motion recording is activated. 98 • When the frame rate is 23.98P and one of the following is also true, the frames value in the time code will run from 0 to 29 instead of 0 to 23. - > [£ Display Setup] > [HDMI Scan Mode] is set to [ PsF (Forced 1080i)]. - The output resolution is set to 1280x720. Selecting the Video Output's Scan Mode When using external devices that support only interlaced scanning, you can change the scan mode of the video signal output from the HDMI OUT terminal. 1 Select [HDMI Scan Mode]. > [£ ! Display Setup] > [HDMI Scan Mode] 2 Select the desired option and then select [X].