Canon iPF610 iPF610 User Manual - Page 680

Problems with the printing quality Paper rubs against the Printhead Cause The paper type as specied on the printer does not match the type specied in the printer driver. (*1) Corrective Action Make sure the same paper type is specied on the printer as in the printer driver. (→P.172) (→P.130) (→P.173) Make sure the same paper type is specied in the printer driver as on the printer. 1.Hold down the Stop button for a second or more to cancel printing. 2.Change the paper type in the printer driver and try printing again. Paper has been loaded incorrectly, causing it to wrinkle. Reload the paper. (→P.162) (→P.124) (→P.165) The Printhead is set too low. In Head Height, choose Automatic. (→P.603) You are printing on heavyweight paper or paper that curls or wrinkles easily after absorbing ink. When printing on Heavyweight Coated Paper or other paper-based media, choose a VacuumStrngth setting of Strong, or Strongest. If the paper is still scratched, try setting the Printhead level in Head Height to High. (→P.610) (→P.603) When printing on CAD Tracing Paper or lm-based media, choose a VacuumStrngth setting of Standard, Strong, or Strongest. If the paper is still scratched, try setting the Printhead level in Head Height to High. (→P.610) (→P.603) When printing on paper 0.1 mm (0.004 in) thin or thinner, choose a VacuumStrngth setting of Weakest. If the paper is still scratched, try setting the Printhead level in Head Height to High. (→P.610) (→P.603) If edges of the paper curl and become soiled when printing on rolls of glossy photo paper, in Media Detailed Settings in the printer driver, set Near End Margin to 20mm. *1: Always make sure the loaded paper matches the media type setting on the printer. 666 Troubleshooting