Canon iPF610 iPF610 User Manual - Page 715

Messages regarding paper Papr Size Mismatch Cause Corrective Action The paper size as specied on the printer does not match the size specied in the printer driver. If you have selected Fit Roll Paper Width in the printer driver settings and Warning in Detect Mismatch in the printer menu: Printing resumes after the warning message is displayed. However, note that this error may cause paper jams and affect the printing quality. Try printing again after adjusting the paper size as specied in the printer driver and the size specied on the printer so that they match. If you have selected Fit Roll Paper Follow the steps below to ensure Width in the printer driver settings the paper size matches on the and Pause in Detect Mismatch in printer and in the printer driver. the printer menu: 1.Hold down the Stop button for a second or more to cancel printing. 2.Load paper of the same size as you have specied in the printer driver. 3.Change the paper size in the printer driver and try printing again. Press the Online button to resume printing. However, this may cause a paper jam or printing problem. This paper cannot be used. Check supported paper sizes. Cause The loaded paper is too large for the printer. Corrective Action Load paper of the correct size. (→P.117) The loaded paper is too small for the printer. Load paper of the correct size. (→P.117) Paper has been loaded that is too small to print the test pattern for printhead adjustment or nozzle checking. Load unused paper A4/Letter-sized or larger. More than one sheet may be required depending on the adjustment. Error Message 701