Canon iPF610 iPF610 User Manual - Page 727

Messages regarding printing or adjusment Messages regarding printing or adjusment Use another paper. Cause The Printhead and feed amount cannot be adjusted when highly transparent lm is loaded. Corrective Action For automatic Printhead adjustment, we recommend using a type of paper that you often use, other than lm. (→P.599) Adjust the feed amount manually. (→P.607) Cannot print as specied. Press Load/Eject and replace paper with A4/LTR (vertical) or larger Cause Corrective Action The loaded paper is too small. Press the Load/Eject button and switch to paper A4/Letter, vertical, or larger. Press Load/Eject and replace roll with 10 in. wide or larger roll. Cause Corrective Action The loaded paper is too small. Press the Load/Eject button and load a roll at least 10 inches (254 mm) wide. Cannot adjust band. Cause The Printhead nozzles are clogged. Corrective Action Follow the steps below to check the nozzles. 1.Print a test pattern to check the nozzles. (→P.625) 2.Clean the Printhead if the nozzles are clogged. (→P.626) Highly transparent lm is loaded that cannot be used Adjust the feed amount manually. for feed amount adjustment. (→P.607) Cannot adjust printhead. Cause The Printhead nozzles are clogged. Corrective Action Follow the steps below to check the nozzles. 1.Print a test pattern to check the nozzles. (→P.625) 2.Clean the Printhead if the nozzles are clogged. (→P.626) Highly transparent lm is loaded that cannot be used We recommend using a type of paper that you often for Printhead adjustment. use, other than lm, for Printhead adjustment. (→P.599) Error Message 713