Canon iPF610 iPF610 User Manual - Page 706

Other problems Other problems The printer consumes a lot of ink Cause Many full-page color images are printed. Corrective Action In print jobs such as photos, images are lled with color. This consumes a lot of ink. This does not indicate a problem with the printer. Head Cleaning B is used often. Head Cleaning B consumes a lot of ink. This does not indicate a problem with the printer. Unless the printer has been moved or stored for a long period or you are troubleshooting Printhead problems, we recommend not performing Head Cleaning B, to the extent possible. You have just nished initial installation, when more ink is consumed to ll the system. After initial installation or at the rst-time use after transfer, ink ows into the system between the Ink Tank and Printhead, which may cause the ink level indicators to drop to 80%. This does not indicate a problem with the printer. A message to check the Maintenance Cartridge is not cleared after you replace the Maintenance Cartridge Cause The printer has not detected the new Maintenance Cartridge. Corrective Action Remove the new Maintenance Cartridge you have just installed and insert it again rmly. Restart the printer. Paper is not cut straight Cause The paper is bent or curled at the cut position. Paper rises by the ends of the cut position before it is cut. Corrective Action Straighten out any curling by the edges of the paper. Reload the paper correctly. Paper cannot be cut Cause Corrective Action The printed document became caught on a foreign Remove the foreign object by the Output Tray to object by the Output Tray, which lifted the document. enable the printer to eject the printed document, The Cutter passed under the paper. keeping it level. In the printer driver, No or Print Cut Guideline is specied in Auto Cut. Specify Yes in Auto Cut in the printer driver. In MAIN MENU, Eject or Manual is specied in Cutting Mode. Specify Automatic in Cutting Mode in MAIN MENU. 692 Troubleshooting