Canon imageFORMULA DR-5080C High Speed Color Instruction Manual - Page 79
E20, E21, E22, E23, E24, E25, E27, E28, E29, E30, E40, E41, E80, E85
View all Canon imageFORMULA DR-5080C High Speed Color manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
4.5 When An Error Code is Displayed Error code Cause Remedy C06 The imprinter cover and endorser ED600 cover are open (with imprinter and endorser ED600 installed). Close the imprinter cover and endorser ED600 cover. Error code Cause Remedy C07 The upper unit, imprinter cover and endorser ED600 cover are open (with imprinter and endorser ED600 installed). Close all covers. Error codes Cause Remedy E20, E21, E22, E23, E24, E25, E27, E28, E29, E30, E40, E41, E80, E85 Unit internal error The unit must be repaired by a service engineer. Turn the power OFF, contact the store of purchase or a Canon service department, and notify them of the error code. Error code L01 Cause Too much data. Ran out of memory. Remedy Press the Stop key to reset the counter to "0". Optional memory must be added on to use an extra function. Contact the store of purchase or a Canon service department. For details on additional memory requirements when extra functions are set, see "DR-5020/ 4 5080C Scan Mode Tables." (P.88) Error code Cause Remedy L02 Too much data. Ran out of memory. Press the Stop key to reset the counter to "0". This error occurs if you scan both sides of an A3/11" x 17"-size document. Either scan one side of the document at a time, or change the scanning mode. Error code Cause Remedy U01 Number of document sheets to be scanned exceeds set number of sheets in the verify scan. Two or more sheets may have been fed when the number of sheets is counted. Press the Stop key to reset the counter to "0". Check the number of sheets to see if all document sheets have been counted, and scan the document again. 79