Canon imageFORMULA DR-M140 WA10 User Manual - Page 39
Web Menu Settings, Scanner Name Setting, Network Setting
View all Canon imageFORMULA DR-M140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Web Menu Settings This section describes the setting items on each of the pages of the web menu. Scanner Name Setting If you click [Scanner Name Setting] on the left menu, the page below is displayed. Network Setting If you click [Network Setting] on the left menu, the page below is displayed. Item Scanner Name Description Displays the device name of the connected scanner. Item Description Default Value DHCP Enable ([ON]) / disable ([OFF]) the DHCP protocol. To assign an IP address using ON DHCP, the DHCP server must be running in your subnetwork. IP Address Set the IP address of the device. If DHCP is enabled, the IP address obtained from it will be applied. The value must be four decimal numbers separated by dots and expressed in the [xxx.xxx.xxx.xxx] format. 192.168.0.10 Subnet Mask Set the subnet mask of the device. If DHCP is enabled, the subnet mask obtained from it will be applied. The value must be four decimal numbers separated by dots and expressed in the [xxx.xxx.xxx.xxx] format. 255.255.255.0 39