Canon imagePROGRAF GP-2000 imagePROGRAF GP-4000 GP-2000 series User Manual - Page 132

11. Tap OK. After the roll is rewound, it stops automatically. Manual (for paper of which the leading edge rubs the print head) Note • Once the following step has been performed, the procedure can be started from step 8 the next time. Printing the second and subsequent times Printing after replacing with the same type of paper 1. Tap paper settings display area on Home screen of touch screen. Note • If the Home screen does not appear, tap the HOME button. 2. Tap paper feed slot where roll paper for which you want to set cutting method is loaded. 3. Tap Paper settings. 4. Tap Advanced. 5. Tap Cutting mode. 6. Tap User cut. 7. When Do you want to set to detect the leading edge of the paper? is displayed, select Do not detect. Note • If you set the detection of paper leading edge to Do not detect, a margin of about 4.0 inches (10 cm) is created at the paper leading edge when printing starts. 132