Canon imagePROGRAF GP-2000 imagePROGRAF GP-4000 GP-2000 series User Manual - Page 285
Connecting Smartphone/Tablet to Printer Directly Wireless, Direct
View all Canon imagePROGRAF GP-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
Connecting Smartphone/Tablet to Printer Directly (Wireless Direct) You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below. • Wi-Fi connection (connecting devices using a wireless router) • Wireless Direct connection (connecting devices without using a wireless router) This section describes wireless direct, which allows you to print by connecting the devices to the printer directly. Important • Check the usage restrictions and switch the printer to the wireless direct. Restrictions • The administrator password is required to change settings if it is enabled for changing settings using the operation panel. • If a device has already been connected to the printer directly and you want to add a device to connect, connect it to the printer directly. You can connect up to 5 devices to the printer at the same time. Connect with Wireless Direct Change settings below to prepare for wireless direct. • Printer's LAN settings Changing Printer Setting • Settings of a device to connect Connecting Smartphone/Tablet to Printer Changing Printer Setting 1. Make sure printer is turned on. 2. Flick HOME screen and tap LAN settings. Home Screen Menu Composition 3. Tap Wireless Direct. 4. Tap Settings. 5. Tap Enable/disable Wireless Direct and tap Yes. 6. Confirm displayed message and tap OK. After Wireless Direct is enabled, the identifier (SSID), etc. when using the printer with wireless direct connection are displayed. 285