Canon imagePROGRAF GP-2000 imagePROGRAF GP-4000 GP-2000 series User Manual - Page 223

Selecting Enable allows you to receive the WSD printing data faster. ▪ Timeout settings Specifies the timeout length. ◦ Bonjour settings Setting items when you use Bonjour. ▪ Enable/disable Bonjour Selecting Enable allows you to use Bonjour to perform the network settings. ▪ Service name Specifies the Bonjour service name. You can use up to 48 characters for the name. Note • You cannot use the same service name as that already used for other LAN connected devices. ◦ SNTP settings Performs various settings for SNTP (Simple Network Time Protocol). ◦ Spanning tree settings Enables/Disables spanning tree. Selecting Enable avoids circulating data on a network. ◦ LPR protocol settings Enables/Disables the LPR setting. ◦ RAW protocol Enables/Disables RAW printing. ◦ LLMNR Specifies ON/OFF of LLMNR (Link-Local Multicast Name Resolution). Selecting ON allows the printer to detect printer's IP address from the printer name without a DNS server. ◦ Gigabit Ethernet settings Specifies the communication speed and communication method when using Gigabit Ethernet. ◦ Use Dedicated Port Selects whether to use a dedicated port for a command sent from a Canon application to the printer. Selecting ON allows you to use the dedicated port. ◦ IPP settings Selecting Enable allows you to print via the network with the IPP protocol. If you use the security print function when printing using IPP protocol in AirPrint etc., select Enable for Security Print. ◦ Wi-Fi DRX settings Selecting Enable allows you to activate discontinuous reception when using Wi-Fi. ◦ Wired LAN DRX settings 223