Canon imagePROGRAF GP-2000 imagePROGRAF GP-4000 GP-2000 series User Manual - Page 483

width of both paper roll 1 and paper roll 2 Condi- Is the width of paper roll 1 different from the tion 7 width of paper roll 2? Roll width is different Roll width is the same Select the paper roll whose width is closer to the width specified for the print job Select the paper roll currently being fed into the platen *1 *1 In the following cases, neither roll 1 nor roll 2 are being fed onto the platen. In such cases, paper roll 1 is selected. • When the printer has switched to sleep mode and has returned to the initial position • When the printer has been turned on • When cut paper has been fed into the printer and has exited it If the Detect paper setting mismatch setting is set on Display warning or Do not detect Condition Situation Only one of either paper roll 1 or paper roll 2 is long enough Judgment result Select the paper roll of sufficient length Condition 1 Whether the paper roll loaded on the printer is long enough to print the paper size specified for the print job. Neither paper roll 1 nor paper roll 2 are long enough Both paper roll 1 and paper roll 2 are long enough Error On the Printer's menu,Manage re- To Condition 2 maining roll amount is set on Disable (length of the paper roll cannot be determined) Condition 2 Whether the paper roll loaded on the printer matches the paper type specified for the print job. Only one of either paper roll 1 or paper roll 2 matches the paper type Select the paper roll matching the paper type Neither roll 1 nor roll 2 match the paper type Both paper roll 1 and paper roll 2 match the paper type To Condition 3 Condi- In the Printer menu, how has the Roll paper tion 3 auto switching setting changed? It has changed to Do not identify size Select the paper roll currently being 483