Canon imagePROGRAF GP-2000 imagePROGRAF GP-4000 GP-2000 series User Manual - Page 255

Selecting Enable HTTPS redirection redirects the communication using CHMP to encrypted communication. Note • To use CHMP for encrypted communication, you need to register the printer's root certificate to your computer. Registering Printer's Root Certificate to Local Computer for SSL Communication • CHMP is a Canon proprietary protocol. ◦ Network interface settings To connect to a hub that supports STP, select Enable. Selecting Enable perform the intermittent data reception when connecting to the network. ◦ DRX settings Selecting Enable perform the intermittent data reception when connecting to the network. ◦ IP filtering Allows or denies access for specific IP addresses. Settings for both IPv4 and IPv6 addresses can be specified. Important • If the device address for the administrator has been set to rejection by mistake, initialize the printer's network information, and then perform setup again. LAN settings > Wi-Fi/Wireless Direct/Wired LAN > Settings > Advanced setup > Reset LAN settings ◦ MAC address filtering settings Allows or denies access for specific MAC addresses. Important • If the device address for the administrator has been set to rejection by mistake, initialize the printer's network information, and then perform setup again. LAN settings > Wi-Fi/Wireless Direct/Wired LAN > Settings > Advanced setup > Reset LAN settings ◦ Reset LAN settings Initializes the network settings on the printer. After resetting, perform setup again as necessary. 255