Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 / TX-3100 / TX-2100 Qu - Page 10

Installing the Print Head

Get Canon imagePROGRAF TX-4100 MFP Z36 PDF manuals and user guides View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

8 Installing the Print Head Instructions are now shown on the touch screen regarding print head installation. Install the print head by following the instructions. 1 Open the top cover. 2 Tilt the print head lock lever towards you. Important ● Do not move the carriage (the area enclosed by a circle in the diagram). If you accidentally move it, temporarily close the top cover and it will return to its original position. 3 Open the print head locking cover by following the instructions on the screen and tap OK. Do not touch the electrical contacts of the carriage. 4 Grasp the print head as shown in the diagram and remove it from the bag. Hold here Do not touch here 5 Remove the orange protective caps in the order shown in the diagram. Hold here to remove Important ● Do not touch the part that was being protected by the protective cap (part shown shaded in the diagram) under any circumstances. Touching it may cause damage to the print head or printing problems. ● The print head is filled with ink. Be careful to avoid getting your clothes and surrounding items dirty when removing the protective caps. It is recommended that you remove the protective caps above the bag that contained the print head. ● Do not reattach the protective caps after removing them. Furthermore, dispose of them according to local regulations. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
8
8
Installing the Print Head
Instructions are now shown on the touch screen regarding print head installation. Install the print head by following the instructions.
1
Open the top cover.
Important
●
Do not move the carriage (the area enclosed by a circle in the
diagram). If you accidentally move it, temporarily close the top
cover and it will return to its original position.
2
Tilt the print head lock lever
towards you.
3
Open the print head locking cover
by following the
instructions on the screen and tap
OK
. Do not touch the
electrical contacts of the carriage.
Do not touch here
4
Grasp the print head as shown in the diagram and
remove it from the bag.
Hold here
5
Remove the orange protective caps in the order shown in the diagram.
Hold here to remove
Important
●
Do not touch the part that was being protected by the protective cap (part shown shaded in the diagram) under any
circumstances. Touching it may cause damage to the print head or printing problems.
●
The print head is filled with ink. Be careful to avoid getting your clothes and surrounding items dirty when removing the
protective caps. It is recommended that you remove the protective caps above the bag that contained the print head.
●
Do not reattach the protective caps after removing them. Furthermore, dispose of them according to local regulations.