Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 / TX-3100 / TX-2100 Qu - Page 7
Turning On the Printer
![]() |
View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
6 Turning On the Printer 1 Open the top cover. 2 Pull up and remove the belt stopper. ● Keep the belt stopper for future use. You will need it in case you move the printer to another location. 3 Remove the tape and protective material. ●Peel off the tape affixed to the carriage, and then pull the protective material (the area shown shaded in the diagram) towards you and remove it. Remove the protective sheet if there is one attached. 4 Close the top cover. 5 Connect the power cord to the printer. ● Insert the power cord into the power connector on the rear of the printer. For the TX-2100 / TX-3100 For the TX-4100 6 Plug the power cord into the outlet, and then turn on the printer. 7 8 When the language selection screen appears on the touch screen, select When a message prompting you to start the setup appears on the touch and tap a language (lightly with screen, tap OK. your finger, and then move your finger away). Then, if the screen for selecting a time zone appears, select and tap your region. 5
![](/manual_guide/products/canon-imageprograf-tx3100-imageprograf-tx4100-tx3100-tx2100-quick-guide-04908a6/7.png)