Canon imagePROGRAF W8200 Network Guide - Page 44
Procedures Required for a NetWare(R) Network
View all Canon imagePROGRAF W8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Procedures Required for a NetWare® Network Here is a summary of the procedures required to set the printer for use on a NetWare® network. 1 Connect the network cable ÆSetup Guide Follow the instructions in the Setup Guide to connect the network cable. 2 Setting the Printer Frame Type ÆP.4-3 Set the frame type to select the printer protocol. Then perform the communication setup between your printer and computer using the following software. • GARO Device Setup Utility (Canon software application provided with the printer.) 3 Setting Up a NetWare® Print Service ÆP.4-6 Perform the settings for the NetWare® service. You can perform these settings on the computer with one of the following applications: • NWADMIN or PCONSOLE (Novell software application provided with NetWare®) 4 Setting NetWare® Printer Protocol ÆP.4-11 Perform this procedure to set the printer protocol. You can perform these settings with the web browser from a computer on the network: • Web Browser (Remote UI) 5 Setting the Computer for NetWare® ÆP.4-18 Perform these settings on every computer to be used with the printer. Important z Steps 1, 2, 3, 4 should be performed by the network system administrator. 4-2 NetWare® Settings (Windows)