Canon imagePROGRAF iPF670 MFP L24 L24 - L36 Large Format Scanner User Manual - Page 41

Loading Firmware

Get Canon imagePROGRAF iPF670 MFP L24 PDF manuals and user guides View all Canon imagePROGRAF iPF670 MFP L24 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Loading Firmware  Locate the firmware zipped file and a USB stick, which must have been formatted as FAT32 with a maximum capacity no greater than 128GB.  On a PC, use Windows Explorer® to extract the firmware zipped files to the root of a USB memory stick.  Place the USB stick into the scanner.  On the scanner UI, use the left /right buttons as necessary to select the Settings and press OK. Select Firmware Load icon and press OK.  DO NOT SWITCH OFF the scanner during the firmware loading process as this can cause permanent damage to the scanner. The UI will display the percentage complete while it loads the firmware into the scanner. Wait until the firmware has loaded and the scanner has rebooted automatically. This will take a few minutes. Version 1.0 41 Global Scanning UK Ltd © 2016

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
Version 1.0
41
Global Scanning UK Ltd © 2016
Loading Firmware
Locate the firmware zipped file and a USB stick, which must have been formatted as FAT32 with
a maximum capacity no greater than 128GB.
On a PC, use Windows Explorer® to extract the firmware zipped files to the root of a USB
memory stick.
Place the USB stick into the scanner.
On the scanner UI, use the left /right buttons as necessary to select the Settings and press OK.
Select Firmware Load icon and press OK.
DO NOT SWITCH OFF the scanner during the firmware loading process as this can cause
permanent damage to the scanner. The UI will display the percentage complete while it loads
the firmware into the scanner. Wait until the firmware has loaded and the scanner has rebooted
automatically. This will take a few minutes.